For 1990-2009 cars only
- Remove the nut (702), bolts (730), and guide (703).
- Remove the crankshaft position (CKP) sensor (704) and harness (701).
- Remove the guide (236). Note, the concave area of the guide faces the front of engine.
- Remove the sprocket (237) and key (123).
Important: The powertrain control module (PCM)
must perform the idle learn procedure to determine the minimum throttle position and
to establish idle speed when any of the following components are replaced:
• Throttle body • Timing belt • Timing belt drive sprocket
Refer to
Idle Learn
.
• Crankshaft and bearings
