| Table 1: | Engine Control Module (ECM) Hybrid |
| Table 2: | Starter/Generator Control Module (SGCM) |
| Table 3: | Battery Energy Control Module (BECM) |
Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
APM Mode High to Low | Engine Control Module, Special Functions, Hybrid Outputs | 36V DC to 12V DC |
APM Set Point Control | Engine Control Module, Special Functions, Hybrid Outputs | Adjusts 12Volt Converter set point from 0 to 16 volts. |
Auto Start/Stop Command | Engine Control Module, Special Functions, Hybrid Outputs | Commands Auto Start/Auto Stop |
AUX. Trans. Pump | Engine Control Module, Special Functions, Hybrid Outputs | Commands the AUX. Transmission pump ON/OFF. |
Batt End of Life Est Reset | Engine Control Module, Special Functions, Hybrid Outputs | Reset Battery life to 100 percent |
Brake Pres. Sensor 2 Learn | Engine Control Module, Special Functions, Hybrid Outputs | Calibrates the brake pressure 2 sensor |
Charge/Assist Gauge | Engine Control Module, Special Functions, Hybrid Outputs | Drives the gauge from minimum to maximum |
Contactor Control | Engine Control Module, Special Functions, Hybrid Outputs | Commands the Hybrid Battery Contactor OPEN/CLOSED |
Economy Mode Indicator | Engine Control Module, Special Functions, Hybrid Outputs | The scan tool commands the indicator ON/OFF. |
Engine Clnt. Pump Relay | Engine Control Module, Special Functions, Hybrid Outputs | Command the Aux. Coolant ON/OFF |
Hill Hold Indicator | Engine Control Module, Special Functions, Hybrid Outputs | The scan tool commands the indicator ON/OFF. |
Hood Ajar Indicator | Engine Control Module, Special Functions, Hybrid Outputs | The scan tool commands the indicator ON/OFF. |
Hybrid Batt Charge Hrs | Engine Control Module, Special Functions, Hybrid Outputs | Resets Charged AMP hours with new battery. |
Hybrid Batt Discharge Amp Hrs | Engine Control Module, Special Functions, Hybrid Outputs | Resets Discharged AMP hours with new battery. |
Hybrid Batt SOC Low | Engine Control Module, Special Functions, Hybrid Outputs | Override SOC set point to 0 percent |
Hybrid Batt SOC High | Engine Control Module, Special Functions, Hybrid Outputs | Override SOC set point to 100 percent |
Hybrid Disable | Engine Control Module, Special Functions, Hybrid Outputs | Disables/Enables Hybrid Function. |
SGCM Coolant Pump | Engine Control Module, Special Functions, Hybrid Outputs | Commands the SGCM coolant pump ON/OFF. |
Starter Enable | Engine Control Module, Special Functions, Hybrid Outputs | Cranks Engine with Starter/Generator |
Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
Brake Hold Sol. 1 | Starter/Generator Control Module, Special Functions | Commands the Brake Hold Solenoid 1 ON/OFF. |
Brake Hold Sol. 2 | Starter/Generator Control Module, Special Functions | Commands the Brake Hold Solenoid 2 ON/OFF. |
SGCM Field Current | Starter/Generator Control Module, Special Functions | Commands the Starter/Generator Field Current ON/OFF. |
Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
Battery Pack Fan Speed | Battery Energy Control Module, Special Functions | Commands the Battery Pack Fan ON/OFF |
