Removal Procedure
- Remove the accelerator and cruise control cables from the bracket, if equipped.
- Remove the bracket.
- Remove the ignition control module (ICM) . Refer to
Ignition Control Module Replacement
.
- Remove the ignition coil housing retaining bolts.
- Remove the ignition coil housing from the camshaft cover.
Installation Procedure
- Install the ignition coil housing to the camshaft cover.
Notice: Refer to Fastener Notice in the Preface section.
- Install the ignition coil housing retaining bolts.
Tighten
Tighten the retaining bolts to 10 N·m (89 lb in).
- Install the ICM. Refer to
Ignition Control Module Replacement
.
- Install the accelerator and cruise control cables bracket.
- Install the accelerator and cruise control cables bracket bolts.
Tighten
Tighten the retaining bolts to 10 N·m (89 lb in).
- Install the accelerator and cruise control cables to the bracket.