For 1990-2009 cars only
Removal Procedure
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the right rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
- Release the pushpin retainers from the right rear wheelhouse liner and remove the liner.
- Release the vent hose clips (2) from the fuel vent pipe (1).
- Release the retaining clip (2) securing the vent hose along the top of the rear suspension crossmember.
- Remove the vent hose (1) from the differential assembly by carefully twisting the hose off of the barbed fitting.
Important: Make note of the routing in order to aid in reassembly.
Installation Procedure
- Install the vent hose (1) to the differential assembly by pushing the vent hose over the barbed fitting. Ensure the vent hose is fully seated on the fitting.
- Secure the vent hose retaining clip (2) along the top of the rear suspension crossmember.
- Secure the vent hose clips (2) to the fuel vent pipe (3).
- Position the wheelhouse liner to the vehicle and install the pushpin retainers.
- Install the wheel and tire assembly. Refer to Tire and Wheel Removal and Installation .
- Lower the vehicle.
