Removal Procedure
- Remove the rear wiper arm finish cap to expose the wiper arm nut.
- Remove the rear wiper arm nut.
- Lift the rear wiper arm assembly away from the rear window and remove the wiper arm from the pivot shaft.
Installation Procedure
- Position wiper blade assembly on the first rear window defogger grid line above the blackout strip as shown in the illustration.
Notice: Refer to Fastener Notice in the Preface section.
- Install the rear wiper arm nut.
Tighten
Tighten the nut to 27 N·m (20 lb ft).
- Install the rear wiper arm finish cap.
- Operate the windshield wipers and inspect for proper operation.