GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 929509  Size: SH
  1. Lift the wiper arm up to the service position.
  2. Remove the wiper blade element by squeezing the metal tabs and pulling on the end of the insert at the heel claw.

Installation Procedure


    Object Number: 929541  Size: SH

    Important: Do not remove the retainer clips from the new wiper blade element until installed.

  1. Slide the wiper blade element into the wiper blade, starting with the heel claw, so that the claw engages in the groove of the wiper blade element.
  2. Guide the wiper blade element through the wiper blade claw sets.

  3. Object Number: 929546  Size: SH

    Notice: If the metal clip on the wiper blade insert is not completely engaged to the heel claw, the wiper blade insert will not be sufficiently retained and may result in windshield damage.

  4. Push the wiper blade insert so that the metal tabs fully engage into the heel claw.