GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 943456  Size: SH
  1. Remove the rear door outer belt seal. Refer to Rear Side Door Window Outer Sealing Strip Replacement .
  2. Remove the inner rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
  3. Remove the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement .
  4. Remove the rear door lower speaker to access the forward edge of the glass. Refer to Radio Rear Side Door Speaker Replacement.
  5. Lower window to access window bolts.
  6. Remove the window bolts.
  7. Pull the window out of the window regulator guide plate.
  8. Slide the window down and out of the primary glass run channels.
  9. Remove the window by tilting outboard and pulling the window out of the door through the door belt opening.

Installation Procedure


    Object Number: 943456  Size: SH
  1. Install the window glass by sliding the window into the door through the outside door belt opening.
  2. Install the window into the primary glass run channels and rest the window on the regulator guide plate.
  3. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the window bolts.
  5. Tighten
    Tighten the bolts to 10 N·m (89 lb in).

  6. Install the rear door lower speaker. Refer to Radio Rear Side Door Speaker Replacement .
  7. Install the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement .
  8. Install the rear inner door trim panel. Refer to Rear Side Door Trim Panel Replacement .
  9. Install the rear door outer belt seal. Refer to Rear Side Door Window Outer Sealing Strip Replacement .
  10. Operate the window to inspect the operation.