GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2007 🢒 VUE - FWD 🢒 Transmission/Transaxle 🢒 Automatic Transaxle - 4T45-E 🢒 Control Valve Assembly and Transmission Fluid Pressure Switch Installation

    Object Number: 1776844 Size: SH
  1. Install the control valve body assembly (18) onto the spacer plate with bonded gaskets (90).

    2. Object Number: 1776867 Size: SH
  2. Inspect the TFP switch assembly (13) in order to verify the condition and correct location of the pressure switch O-rings.
  3. If necessary replace the pressure switch assembly (13).

    4. Object Number: 1205810 Size: SH
  4. Install the TFP switch assembly (13) onto the control valve body assembly.

    5. Object Number: 1205826 Size: SH
  5. Install the 18 control valve body assembly bolts.

    6. Object Number: 20876 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  6. Hand start the bolts.

    7. Tighten
    Tighten the bolts to 14 N·m (124 lb in).