Removal Procedure
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
- Disconnect the wiring harness from the transmission fluid temperature (TFT) sensor.
Important: Do not damage the TFT sensor or transaxle case.
- Remove the TFT sensor bolt/screw.
- Remove the TFT sensor and the O-ring.
Installation Procedure
- Apply automatic transmission fluid to the new TFT sensor O-ring seal.
- Install the new TFT sensor O-ring seal onto the TFT sensor.
- Install the TFT sensor into the transmission case assembly.
Notice: Refer to Fastener Notice in the Preface section.
- Install the TFT sensor bolt.
Tighten
Tighten the bolt to 12 N·m (106 lb in).
- Connect the wiring harness to the TFT sensor.
- Lower the vehicle.