Preliminary Procedure

Remove the inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement

1

Steering Wheel Nut

Notice: Refer to Fastener Notice in the Preface section.

Tighten
41 N·m (30 lb ft)

2

Steering Wheel

Procedure

1. Disconnect any electrical connectors as needed.
2. Make the relationship between the steering wheel and the steering column shaft. The marks will be needed to align the wheel during installation.
3. Remove the steering wheel using puller J 1859-A and puller legs J 36541-A .

Special Tools