Preliminary Procedures

1. Remove the underhood electrical center. Refer to Underhood Electrical Center or Junction Block Replacement .
2. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .

1

Air Cleaner Assembly Bolt

Notice: Refer to Fastener Notice in the Preface section.

Tighten
8 N·m (71 lb in)

2

Air Cleaner Assembly Bolt (Qty: 2)

Tighten
6 N·m (53 lb in)

3

Air Cleaner Assembly

Procedure

1. Disconnect any electrical connectors as needed.
2. Transfer any parts as needed.