GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2008 🢒 VUE - FWD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Brake Fluid Level Indicator Switch Replacement

Removal Procedure

    Object Number: 931316 Size: SH
  1. Without draining the coolant or removing the hoses, remove and position aside the radiator surge tank. Refer to Radiator Surge Tank Replacement .
  2. Disconnect the brake fluid level sensor electrical connector.

    3. Object Number: 926579 Size: SH
  3. While simultaneously depressing the retaining tabs on the opposite side of the sensor electrical connection, carefully pull the sensor from the master cylinder reservoir.
  4. Remove the low brake fluid level sensor.

Installation Procedure

    Object Number: 926579 Size: SH
  1. While noting the proper orientation, install the brake fluid level sensor to the master cylinder.
  2. Press the brake fluid level sensor firmly into the master cylinder reservoir, ensuring that the retaining tabs are fully engaged.

    3. Object Number: 931316 Size: SH
  3. Connect the brake fluid level sensor electrical connector.
  4. Without draining the coolant or removing the hoses, remove and position aside the radiator surge tank. Refer to Radiator Surge Tank Replacement .