Preliminary Procedure

Remove the instrument panel accessory bezel. Refer to Instrument Panel Accessory Bezel Replacement .

1

Radio Screw (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2.5 N·m (22 lb in)

2

Radio Assembly

Procedure

1. Disconnect the electrical connector.
2. Disconnect the antenna cable.
3. Reprogram the radio after replacement. Refer to Control Module References .

Tip
When installing the radio verify that the locator pin on the back of the radio is firmly seated in the I/P structure extension.