Starter Replacement LZ4

1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection.



2. Remove the 3 transmission bracket bolts (1).
3. Remove the transmission bracket (2) from the vehicle.



4. Remove the starter solenoid BAT terminal nut (3).
5. Remove the battery positive cable terminal (2) and engine harness terminal (1) from the starter motor.



6. Disconnect the starter motor electrical connector (1).



7. Remove the starter motor bolts.
8. Remove the starter motor from the vehicle.

1. Position the starter motor to the vehicle.

Caution: Refer to Fastener Caution in the Preface section.





Note: Hand tighten all bolts before finalizing any torques.

2. Install the starter bolts and tighten to 43 N·m (32 lb ft).



3. Connect the starter motor electrical connector (1).



4. Install the engine harness terminal (1) and battery positive cable terminal (2) to the starter. Ensure that the battery positive cable terminal anti-rotation feature is aligned correctly.
5. Install the starter solenoid BAT terminal nut (3) and tighten to 15 N·m (11 lb ft).



6. Position the transmission bracket (2) to the vehicle.
7. Install the 3 transmission bracket bolts (1) and tighten to 50 N·m (37 lb ft).
8. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection.

Starter Replacement LE5/LAT

1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection.
2. Hoist and raise the vehicle. Refer to Lifting and Jacking the Vehicle.



3. Disconnect the starter motor electrical connector (3).
4. Remove the starter solenoid BAT terminal nut (4).
5. Remove the battery positive cable terminal (1) and engine harness terminal (2) from the starter motor.



6. Remove the starter motor bolts.
7. Remove the starter motor from the vehicle.

1. Position the starter motor to the vehicle.

Caution: Refer to Fastener Caution in the Preface section.





Note: Hand tighten all bolts before finalizing any torques.

2. Install the starter motor bolts and tighten to 43 N·m (32 lb ft).



3. Install the engine harness terminal (2) and the battery positive cable terminal (1) to the starter motor. Ensure that the battery positive cable terminal anti-rotation feature is aligned correctly.
4. Install the starter solenoid BAT terminal nut (4) and tighten to 15 N·m (11 lb ft).
5. Connect the starter motor electrical connector (3).
6. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection.

Starter Replacement LY7

1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection.
2. Remove the left side catalytic convertor. Refer to Catalytic Converter Replacement - Left Side.



3. Disconnect the starter motor electrical connector.



4. Remove the starter solenoid BAT terminal nut.
5. Remove the battery positive cable terminal and engine harness terminal from the starter motor.



6. Remove the starter motor bolts.
7. Remove the starter motor from the vehicle.

1. Install the starter motor to the vehicle.

Caution: Refer to Fastener Caution in the Preface section.





Note: Hand tighten all bolts before finalizing any torques.

2. Install the starter motor bolts and tighten to 50 N·m (37 lb ft).
3. Install the engine harness terminal and battery positive cable terminal to the starter motor.



4. Install the starter solenoid BAT terminal nut and tighten to 15 N·m (11 lb in).



5. Connect the starter motor electrical connector.
6. Install the left side catalytic convertor. Refer to Catalytic Converter Replacement - Left Side.
7. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection.