GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2009 🢒 VUE - FWD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Accelerator Pedal with Position Sensor Assembly Replacement

Removal Procedure

    Object Number: 1883846 Size: SH
  1. Remove the driver knee bolster reinforcement. Refer to Driver Knee Bolster Reinforcement Replacement.
  2. Disconnect the instrument panel wiring harness electrical connector (2) from the accelerator pedal position (APP) sensor (1).

    3. Object Number: 1883847 Size: SH
  3. Remove the APP sensor bolts (1).
  4. Remove the APP sensor (2).

Installation Procedure

    Object Number: 1883847 Size: SH
  1. Position the APP sensor (2) against the brake pedal assembly.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the APP sensor bolts (1) and tighten to 10 N·m (89 lb in).

    3. Object Number: 1883846 Size: SH
  3. Connect the instrument panel wiring harness electrical connector (2) to the APP sensor (1).
  4. Install the driver knee bolster reinforcement. Refer to Driver Knee Bolster Reinforcement Replacement.