Warning: Refer to Cracked Window Warning in the Preface section.
Note: Before cutting out a quarter window, apply a double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
- Open the liftgate.
- Remove the rear quarter panel trim. Refer to
Quarter Upper Trim Panel Replacement.
- Disconnect the electrical connectors from the antenna, if equipped.
Warning: Refer to Defroster Outlet Warning in the Preface section.
- Cover the following parts to protect from broken glass:
ā¢ | Defroster outlets and A/C outlets |
Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section.
- Using a utility knife, carefully cut the lace (1) from the sides and the top edge of the window to access the urethane adhesive bead, if equipped.
Note: Keep the cutting edge of the tool against the window.
- Remove the window from the urethane adhesive.
ā¢ | Leave a base of urethane approximately 2 mm (0.078 in) on the pinch-weld flange. |
ā¢ | The only suitable lubrication is clear water. |
Note: Keep the cutting edge of the knife/tool against the window. Do this from inside the vehicle.
- If necessary, use a long utility knife or similar tool to remove the bottom corners of the window from the urethane adhesive.
- Remove the fasteners located on inside of the quarter window.
- Remove the window (1) from the vehicle.