GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Saturn
🢒
2009
🢒
VUE - FWD
🢒
Transmission
🢒
Automatic Transmission - 4T45-E
🢒 Vehicle Speed Sensor Replacement
Removal Procedure
Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
Remove the vehicle speed sensor (VSS) electrical connector (1) from the VSS.
Remove the VSS electrical harness retainer (2) from the VSS.
Remove the retaining stud and the VSS. Pull straight out in order to avoid damage to the case.
Installation Procedure
Clean and dry the VSS.
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the VSS and the retaining stud to
12 N·m (97 lb in)
.
Install the VSS electrical harness retainer (2) to the VSS.
Install the electrical connector (1) to the VSS.
Lower the vehicle.