GM Service Manual Online
For 1990-2009 cars only
Makes
๐ข
Saturn
๐ข
2009
๐ข
VUE - FWD
๐ข
Transmission
๐ข
Automatic Transmission - 2MT70
๐ข Transmission Fluid Auxiliary Cooler Inlet Pipe Replacement
Removal Procedure
Remove the drive motor generator power inverter module support. Refer to
Drive Motor Generator Power Inverter Module Support Replacement
.
Disconnect the transmission fluid auxiliary cooler outlet pipe quick connect fitting (1) at the thermal bypass valve. Refer to
Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
Remove the transmission fluid auxiliary cooler inlet pipe (2) from the thermal bypass valve.
Remove the transmission fluid auxiliary cooler inlet pipe bolt (1).
Remove the transmission fluid auxiliary cooler inlet pipe (2) from the vehicle.
Installation Procedure
Install the transmission fluid auxiliary cooler inlet pipe (2) to the vehicle.
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the transmission fluid auxiliary cooler inlet pipe bolt (1) and tighten to
22 Nยทm (16 lb ft)
Install the transmission fluid auxiliary cooler inlet pipe (2) to the thermal bypass valve.
Connect the transmission fluid auxiliary cooler outlet pipe quick connect fitting (1) at the thermal bypass valve. Refer to
Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
Install the drive motor generator power inverter module support. Refer to
Drive Motor Generator Power Inverter Module Support Replacement
.