GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2009 🢒 VUE - FWD 🢒 Power and Signal Distribution 🢒 Data Communications 🢒 Remote Control Door Lock Receiver Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.


    Object Number: 1763658 Size: SH
  1. Disconnect the negative battery cable.
  2. Remove the driver knee bolster. Refer to Driver Knee Bolster Replacement.
  3. Remove the remote control door lock receiver.
  4. Disconnect the electrical connector.

    5. Perform the SPO reprogramming when RFA receiver is replaced.

Installation Procedure

    Object Number: 1763658 Size: SH
  1. Connect the electrical connector.
  2. Install the remote control door lock receiver.
  3. Install the driver knee bolster. Refer to Driver Knee Bolster Replacement.
  4. Connect the negative battery cable.
  5. For set up and programming, refer to Control Module References.