Removal Procedure
- Remove the sunroof window. Refer to
Sunroof Window Replacement.
- Remove the screws from the sunroof drip channel.
- Remove the sunroof drip channel.
- Slide the sunshade forward to the closed position.
- Push the spring retainer clips on the right side of the sunshade inward to disengage them from the track using an upward lifting motion.
- Remove the sunshade from the sunroof module.
Installation Procedure
- Engage one side of the sunshade by positioning the spring clips into the track.
- Push the spring retainer clips inward on the opposite side of the sunshade to engage them into the track.
- Slide the sunshade back and forth to ensure proper operation.
- Slide the sunshade to the half closed position.
- Install the rear drain drip channel.
- Install the sunroof window. Refer to
Sunroof Window Replacement.