Windshield Wiper System Module Replacement. Suzuki XL-7 AWD 2008

For 1990-2009 cars only

Makes 🢒 Suzuki 🢒 2008 🢒 XL-7 AWD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Windshield Wiper System Module Replacement

Callout

Component Name

Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .

Windshield Washer System Module Assembly Bolts (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
Tighten the bolts in the mandatory sequence as shown to 12 N·m (9 lb ft)

Windshield Washer System Module Assembly

Tip

•	Raise the module from the plenum and disconnect the electrical connector from the wiper motor.

•	Re-connect the electrical connector prior to the installation of the wiper washer module back into the plenum.

Windshield Washer Module Assembly Harness

Windshield Washer Module Assembly Harness Rosebud

Tip
Ensure the rosebud is fastened to the plenum flange to ensure the harness is secure.