Preliminary Procedure

Remove the inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement .

1

Steering Wheel Nut

Notice: Refer to Fastener Notice in the Preface section.

Tighten
37 N·m (27 lb ft)

2

Steering Wheel

Procedure

1. Disconnect any electrical connectors as needed.
2. Remove the steering wheel using puller J 1859-A and puller legs J 42578 .
3. Make an alignment mark to note the relationship between the steering wheel and the steering shaft. The marks will be needed to align the wheel during installation.

Special Tools