1

Shift Control Knob Boot

Tip

1. Depress the sides of the boot in order to release the boot from the instrument panel lower brace bezel.
2. Lift the boot up in order to access the shift control knob screw.

2

Shift Control Knob Screw

Notice: Refer to Fastener Notice in the Preface section.

Tighten
1.5 N·m (13 lb in)

Tip
Loosen the shift control knob screw approximately 4-5 turns. It is not necessary to fully remove the screw from the shift control knob.

3

Shift Control Knob

Tip
Remove the shift control boot if replacing the knob. Refer to Transmission Control Lever Boot Replacement .