GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Suzuki 🢒 2008 🢒 XL-7 AWD 🢒 Preface 🢒 Cautions and Notices 🢒 Brake Fluid Level Indicator Switch Replacement

Removal Procedure

    Object Number: 931316 Size: SH
  1. Remove the underhood electrical center bracket. Refer to Underhood Electrical Center or Junction Block Bracket Replacement .
  2. Disconnect the brake fluid level indicator switch electrical connector.

    3. Object Number: 926579 Size: SH
  3. While simultaneously depressing the retaining tabs on the opposite side of the switch electrical connection, carefully pull the switch from the master cylinder reservoir.
  4. Remove the low brake fluid level sensor.

Installation Procedure

    Object Number: 926579 Size: SH
  1. While noting the proper orientation, install the brake fluid level indicator switch to the master cylinder.
  2. Press the brake fluid level indicator switch firmly into the master cylinder reservoir, ensuring that the retaining tabs are fully engaged.

    3. Object Number: 931316 Size: SH
  3. Connect the brake fluid level indicator switch electrical connector.
  4. Install the underhood electrical center bracket. Refer to Underhood Electrical Center or Junction Block Bracket Replacement .