Preliminary Procedures

1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement.
2. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement.
3. Remove as much power steering fluid from the remote power steering fluid reservoir as possible.
4. Remove the right side engine splash shield. Refer to Engine Splash Shield Replacement - Right Side.
5. Place drain pans under the vehicle as needed.

1

Power Steering Reservoir Outlet Hose Clamp

2

Power Steering Fluid Reservoir Outlet Hose

3

Power Steering Cooler Pipe Clamp

4

Power Steering Cooler Pipe

5

Remote Power Steering Fluid Reservoir Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
9 N·m (80 lb in)

6

Remote Power Steering Fluid Reservoir Bolt

Tighten
9 N·m (80 lb in)

7

Ground Terminal Nut

Tighten
9 N·m (80 lb in)

8

Ground Terminal

9

Power Steering Fluid Reservoir Stud

Tighten
9 N·m (80 lb in)

10

Remote Power Steering Fluid Reservoir

Procedure

Fill and bleed the power steering system. Refer to Power Steering System Bleeding.

Tip
Clean any excess power steering fluid from the vehicle.