GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Suzuki 🢒 2009 🢒 XL-7 AWD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Ignition Coil Replacement - Bank 1

Removal Procedure

    Object Number: 1836230 Size: SH
  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement.
  2. Disconnect the engine wiring harness electrical connector(s) (1) from the ignition coil(s).

    3. Object Number: 860797 Size: SH
  3. Remove the ignition coil bolt(s).
  4. Remove the ignition coil(s).

Installation Procedure

    Object Number: 860797 Size: SH
  1. Install the ignition coil(s).

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the ignition coil bolt(s) tightening the bolts to 10 N·m (89 lb in).

    3. Object Number: 1836230 Size: SH
  3. Connect the engine wiring harness electrical connector(s) (1) to the ignition coil(s).
  4. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement.