For 1990-2009 cars only
- Loosen the upper control arm-to-frame fastener enough to allow movement.
- Rotate the upper control arm-to-frame fastener in the direction necessary to the correct the camber measurement.
- Snug the upper control arm-to-frame fastener, do not tighten at this time.
- Reinspect the rear camber specifications and adjust as necessary.
- Hold the nut and tighten the upper control arm-to-frame bolt to 164 N·m (121 lb ft).
- Repeat the procedure for the other rear wheel.
Note: The frame of the vehicle is slotted, turning the cam nut will move the camber in to the designated location.
Caution: Refer to Fastener Caution in the Preface section.
