Preliminary Procedure

Remove the rear differential assembly. Refer to Differential Replacement .

1

Differential Side Cover Bolts (Qty: 8)

Caution: Refer to Fastener Caution in the Preface section.

Tip
Finger tighten the bolts before torquing to specification.

Tighten
29 N·m (21 lb ft).

2

Differential Side Cover

Tip
Inspect the differential side cover for any damage. If the side cover is damaged, replace the differential assembly. The side cover is not serviced separately.

3

Differential Side Cover Seal

Procedure

1. Before installing the side cover seal, ensure that the groove for the side cover seal is free of dirt and debris. This will ensure that the seal seat properly in the differential housing.
2. Apply a small amount of clean oil to the side cover seal.