Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Drain the transmission, refill when repair is completed. Refer to Transmission Fluid Replacement.
3. Remove the left engine splash shield. Refer to Engine Splash Shield Replacement - Left Side.
4. Remove the left transmission mount and bracket. Refer to Transmission Mount Bracket Replacement - Left Side.

1

Input Speed Sensor Bolt M6 x 25

Caution: Refer to Fastener Caution in the Preface section.

Tip
Apply threadlocker GM P/N 12345382 (Canadian P/N 10953489) or equivalent to the input speed sensor bolt.

Tighten
9 N·m (80 lb in)

2

Input Speed Sensor (ISS)

Tip
Pull the ISS out of the case cover just far enough to gain access to the ISS seal.

3

Input Speed Sensor Seal

Tip