Removal Procedure
- Remove the air cleaner outlet duct. Refer to
Air Cleaner Outlet Duct Replacement .
- Disconnect the engine wiring harness electrical connector from the mass air flow (MAF)/intake air temperature (IAT) sensor.
- Release the clips (1) on the air cleaner lower half.
- Open and rotate the air cleaner upper half.
- Remove the air cleaner element.
Installation Procedure
- Install the air cleaner element.
- Rotate and close the air cleaner upper half.
- Secure the clips (1) on the air cleaner lower half.
- Connect the engine wiring harness electrical connector to the MAF/IAT sensor.
- Install the air cleaner outlet duct. Refer to
Air Cleaner Outlet Duct Replacement .