GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Suzuki 🢒 2007 🢒 XL-7 FWD 🢒 Engine 🢒 Engine Cooling 🢒 Heater Inlet Pipe Replacement

Removal Procedure

    Object Number: 1836897 Size: SH
  1. Partially drain the cooling system. Refer to Cooling System Draining and Filling.
  2. Remove the heater pipe inlet hose (1) from the heater inlet pipe.

    3. Object Number: 1836898 Size: SH
  3. Remove the heater inlet pipe housing bolts (1).
  4. Remove the housing.
  5. Remove the heater inlet pipe housing seal. Discard seal.

Installation Procedure

    Object Number: 1836898 Size: SH
  1. Install a NEW heater inlet pipe housing seal.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the heater inlet pipe housing bolts (1).

    3. Tighten
    Tighten the heater inlet housing bolts to 10 N·m (89 lb in).


    Object Number: 1836897 Size: SH
  3. Install the heater inlet hose (1) to the heater inlet pipe.
  4. Refill the cooling system. Refer to Cooling System Draining and Filling.