GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Suzuki 🢒 2007 🢒 XL-7 FWD 🢒 Engine 🢒 Engine Mechanical - 3.6L 🢒 Starter Replacement

Removal Procedure

    Object Number: 1644827 Size: SH
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  3. Remove the front catalytic convertor. Refer to Catalytic Converter Replacement - Left Side .
  4. Remove the starter solenoid BAT terminal nut.

    5. Object Number: 1394041 Size: SH
  5. Disconnect the engine harness electrical connector.

    6. Object Number: 1394040 Size: SH
  6. Remove the starter bolts and starter.

Installation Procedure

    Object Number: 1394040 Size: SH
  1. Position the starter motor in the engine block.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the starter bolts.

    3. Tighten
    Tighten the bolts to 50 N·m (37 lb ft).


    Object Number: 1394041 Size: SH
  3. Connect the engine harness electrical connector to the starter.

    4. Object Number: 1644827 Size: SH
  4. Install the starter solenoid BAT terminal nut.

    5. Tighten
    Tighten the nut to 10 N·m (89 lb in).

  5. Install the front catalytic convertor. Refer to Catalytic Converter Replacement - Left Side .
  6. Lower the vehicle.
  7. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .