GM Service Manual Online
For 1990-2009 cars only

Object Number: 1819059  Size: MF

Callout

Component Name

Preliminary Procedures

  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
  2. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
  3. Remove as much power steering fluid from the remote power steering fluid reservoir as possible.
  4. Remove the right side engine splash shield. Refer to Engine Splash Shield Replacement - Right Side .
  5. Place drain pans under the vehicle as needed.

1

Power Steering Reservoir Outlet Hose Clamp

2

Power Steering Fluid Reservoir Outlet Hose

3

Power Steering Cooler Pipe Clamp

4

Power Steering Cooler Pipe

5

Remote Power Steering Fluid Reservoir Bolt (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
9 N·m (80 lb in)

6

Remote Power Steering Fluid Reservoir Bolt

Tighten
9 N·m (80 lb in)

7

Ground Terminal Nut

Tighten
9 N·m (80 lb in)

8

Ground Terminal

9

Power Steering Fluid Reservoir Stud

Tighten
9 N·m (80 lb in)

10

Remote Power Steering Fluid Reservoir

Procedure

Fill and bleed the power steering system. Refer to Power Steering System Bleeding .

Tip
Clean any excess power steering fluid from the vehicle.