- Disconnect and remove the fresh air positive crankcase ventilation (PCV) hose
from the left camshaft cover fitting.
- Remove the engine coolant air bleed pipe bracket bolts from the upper intake manifold.
- Remove the fuel injector harness connector from the
engine coolant air bleed pipe bracket.
- Remove the engine coolant air bleed pipe.
- Disconnect and remove the dirty air PCV hose from the intake manifold and the
right camshaft cover fitting.
- Disconnect and remove the intake manifold-to-solenoid evaporative emissions (EVAP)
hose from the intake manifold and from the EVAP solenoid.
- Remove the EVAP solenoid bolt.
- Remove the EVAP solenoid.
- Remove the long intake manifold bolts.
- Remove the short intake manifold bolts.
- Remove the intake manifold assembly.
- Remove and discard the lower intake manifold gasket.