Tools Required
EN 46111
Crankshaft Rotation Socket
Important: Some models use a second design inverted tooth timing drive system on the secondary drive components. Refer to
Camshaft Timing Drive Design Identification
for more information on specific changes.
- Ensure the crankshaft sprocket is installed with the timing mark (1) visible.
- Install the crankshaft sprocket on
to the nose of the crankshaft.
- Align the notch in the crankshaft sprocket with the key in the crankshaft.
- Slide the crankshaft sprocket on the crankshaft nose until the crankshaft sprocket contacts the step in the crankshaft.
- Ensure the crankshaft is in the stage one timing position with the crankshaft
sprocket timing mark (1) aligned to the stage one timing mark on the oil pump cover (2) using the
EN 46111
. Refer to
Camshaft Timing Drive Chain Alignment Diagram
- Stage One.