Removal Procedure
- Remove the air cleaner assembly. Refer to
Air Cleaner Assembly Replacement
.
- Support the engine. Refer to
Engine Support Fixture
.
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
- Remove 3 upper engine mount bracket bolts (1).
- Loosen right upper front bolt (2).
- Remove the ABS connector clip from the frame.
- Remove the upper engine mount bracket nuts (1).
- Remove the lower bracket bolts (2).
- Remove the upper bracket bolt (1) from the bracket.
- Remove the mount (3) and the lower bracket (4) from the vehicle.
- Remove the upper bracket.
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Install the engine mount (3) and the lower bracket (4) to the vehicle.
Tighten
Tighten the lower bracket bolts to 50 N·m (37 lb ft).
- Install the ABS connector clip to the frame.
- Install the upper engine mount bracket nuts (1).
Tighten
Tighten the upper engine mount bracket nuts to 50 N·m (37 lb ft).
- Install the engine mount upper bracket and bolt (1) to the engine. Do not tighten the bolt.
- Tighten the right upper engine mount bracket bolt (2).
Tighten
Tighten the right upper engine mount bracket bolt to 50 N·m (37 lb ft).
- Install the upper engine mount bracket bolts (1).
Tighten
Tighten the upper engine mount bracket bolts to 110 N·m (81 lb ft).
- Lower the vehicle.
- Remove the engine support. Refer to
Engine Support Fixture
.
- Install the air cleaner assembly. Refer to
Air Cleaner Assembly Replacement
.