Caution: Refer to SIR Caution in the Preface section.

Preliminary Procedure

Remove the inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement .

Tip
Right hand steering wheel control switch shown. Left hand similar.

1

Steering Wheel Trim Cover Bolt (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

2

Steering Wheel Trim Cover (Qty: 2)

3

Steering Wheel Control Switch Assembly Screw (Qty: 6)

Tip
DO NOT over tighten the steering wheel control switch screws or damage to the switch(s) or steering wheel covers may occur.

Tighten
2 N·m (18 lb in)

4

Steering Wheel Control Switch Assembly (Qty: 2)

Tip
Make sure the steering wheel control switch(s) are properly seated to the steering wheel shroud during installation.