GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the front side door outside handle. Refer to Front Side Door Outside Handle Replacement .
  2. Remove the front side door window run channel. Refer to Front Side Door Window Channel Replacement .
  3. Remove the front side door speaker. Refer to Radio Front Side Door Speaker Replacement .
  4. Disconnect the mirror electrical connector.
  5. Disconnect the 4 electrical connector rosebuds (2 at the mirror and 2 under the speaker).

  6. Object Number: 1378613  Size: SH
  7. Loosen the 2 rear module bolts.
  8. Remove the 4 remaining module bolts.
  9. Remove the 3 latch bolts from the door shut face.
  10. Disconnect the door harness at the door jamb.
  11. Remove the window regulator module from the door.

Installation Procedure


    Object Number: 1378613  Size: SH
  1. Install the window regulator module into the door.
  2. Connect the door harness at the door jamb.
  3. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the front side door 3 latch screws to the door shut face.
  5. Tighten
    Tighten the bolts to 10 N·m (89 lb in).

  6. Install the front side door 4 module bolts.
  7. Tighten
    Tighten the bolts to 8 N·m (71 lb in).

  8. Connect the 4 electrical connector rosebuds (2 at the mirror and 2 under the speaker).
  9. Connect the mirror electrical connector.
  10. Install the front side door speaker. Refer to Radio Front Side Door Speaker Replacement .
  11. Install the front door window run channel. Refer to Front Side Door Window Channel Replacement .
  12. Install the front door outside handle. Refer to Front Side Door Outside Handle Replacement .