- Inspect the middle control
valve body (370) casting for the following conditions:
• | Damaged machine surface |
- Inspect all valves, springs, bushings, and clean all components
in clean solvent.
- Install the reverse shift
ball check valve bushing - inner (373).
- Install the reverse shift ball check valve (374).
- Install the reverse shift ball check valve bushing - outer (375).
- Install the sleeve/bore plug retainer (362).
- Install the solenoid relay
valve spring (379).
- Install the solenoid relay valve (378).
- Install the solenoid relay valve plunger (377).
- Install the solenoid relay valve sleeve (376).
- Install the sleeve/bore plug retainer (362).
- Install the 3rd gear band
(B4) release valve spring (384).
- Install the 3rd gear band (B4) release valve (385).
- Install the U2 shift valve bore plug (394).
- Install the sleeve/bore plug retainer (362).
- Install the U1 shift valve (386).
- Install the U1 shift valve spring (387).
- Install the U2 shift valve bore plug (394).
- Install the sleeve/bore plug retainer (362).
- Install the M1 shift valve (389).
- Install the M1 shift valve spring (390).
- Install the M1 shift valve bore plug (391).
- Install the sleeve/bore plug retainer (362).
- Install the U2 shift valve (392).
- Install the U2 shift valve spring (393).
- Install the U2 shift valve bore plug (394).
- Install the sleeve/bore plug retainer (362).
- Install the primary regulator
valve (395).
- Install the primary regulator valve spring (396).
- Install the primary regulator valve plunger (397).
- Install the primary regulator valve sleeve (398).
- Install the sleeve/bore plug retainer (362).
- Install the 5 accumulator
check valve assemblies (353).
- Install the cooler by-pass valve spring (380).
- Install the cooler by-pass valve (381).
- Install the TCC check valve spring (383).
- Install the TCC check valve (382).