Preliminary Procedures

1. Remove the hood overslam bumpers. Refer to Hood Bumper Replacement .
2. Remove the primary hood latch. Refer to Hood Primary Latch Replacement .
3. Remove the visible upper bolts for the front headlamps. Refer to Headlamp Replacement .
4. Remove the plastic push pins from the upper fascia as needed. Refer to Front Bumper Fascia Replacement .

1

Front Bumper Upper Fascia Support Bolts (Qty: 5)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
10 N·m (89 lb in)

2

Front Bumper Upper Fascia Support