Preliminary Procedures

1. Remove the rear quarter lower trim panel. Refer to Quarter Lower Rear Trim Panel Replacement .
2. Remove the rear quarter upper trim panel. Refer to Lock Pillar Upper Garnish Molding Replacement .

1

Rear Seat Belt Retractor Bolt (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Tip
Apply GM P/N 12345382 (Canadian P/N 10953489), Permatex® 24200 or equivalent on all seat belt fasteners prior to installation.

Tighten
45 N·m (33 lb ft)

2

Rear Seat Belt Retractor

Tip
Make sure alignment slots are aligned correctly on reinstallation.