GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Suzuki 🢒 2008 🢒 XL-7 FWD 🢒 Engine 🢒 Engine Mechanical - 2.8L, 3.0L, 3.2L, or 3.6L 🢒 Transmission Rear Mount Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

    2. Object Number: 927949 Size: SH
  2. Disconnect the stabilizer links from the stabilizer shaft.
  3. Swing the stabilizer shaft upwards in order to gain additional clearance.

    4. Object Number: 1825510 Size: SH
  4. Remove the transmission mount-to-bracket through bolt (2).
  5. Remove the transmission mount-to-frame bolts (3).
  6. Remove the transmission mount (1) from the vehicle. Position mount between the transaxle and power steering rack in order to remove mount through the left wheel opening.

Installation Procedure

    Object Number: 1825510 Size: SH
  1. Install and position the transmission mount (1).

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the transmission mount-to-frame bolts (3).

    3. Tighten
    Tighten the bolt to 50 N·m (37 lb ft).

  3. Install the transmission mount-to-bracket through bolt (2), while aligning the transmission mount to the bracket.

    4. Tighten
    Tighten the bolt to 110 N·m (81 lb ft).


    Object Number: 927949 Size: SH
  4. Lower the stabilizer shaft and connect the stabilizer links .

    5. Tighten
    Tighten the stabilizer link nuts to 65 N·m (48 lb ft).

  5. Lower the vehicle.