Each of the following service procedures may require programming or setup procedures to be performed on the Auxiliary HVAC Control Module or Auxiliary HVAC actuators.

If the Auxiliary HVAC Control Module is replaced, the following procedure must be performed: Reprogram the Auxiliary HVAC Control Module. Refer to Service Programming System (SPS)

Do not reprogram the Auxiliary HVAC control module unless directed by a service procedure or a service bulletin.

Reprogram the Auxiliary HVAC Control Module. Refer to Service Programming System (SPS) .

If an auxiliary actuator is replaced, the following procedure must be performed: Re-Calibrating Actuators. Refer to Actuator Recalibration .