For 1990-2009 cars only
- Loosen the suspension adjustment link-to-frame fastener enough to allow for movement.
- Rotate the suspension adjustment link cam nut in the direction necessary to correct the toe angle.
- Snug the suspension adjustment link-to-frame fastener, do not tighten at this time.
- Reinspect the rear toe specifications and adjust as necessary.
- Hold the nut and tighten the link-to-frame fastener bolt.
- Repeat the procedure for the other rear wheel.
Important: The frame of the vehicle is slotted, a cam nut is available for service if required.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the bolt to 164 N·m (121 lb ft).
