GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Suzuki 🢒 2008 🢒 XL-7 FWD 🢒 Body Systems 🢒 Fixed and Moveable Windows 🢒 Front Side Door Window Regulator Replacement

Removal Procedure
  1. Remove the front side door outside handle. Refer to Front Side Door Outside Handle Replacement .
  2. Remove the front side door window run channel. Refer to Front Side Door Window Channel Replacement .
  3. Remove the front side door speaker. Refer to Radio Front Side Door Speaker Replacement .
  4. Disconnect the mirror electrical connector.
  5. Disconnect the 4 electrical connector rosebuds (2 at the mirror and 2 under the speaker).

    6. Object Number: 1378613 Size: SH
  6. Loosen the 2 rear module bolts.
  7. Remove the 4 remaining module bolts.
  8. Remove the 3 latch bolts from the door shut face.
  9. Disconnect the door harness at the door jamb.
  10. Remove the window regulator module from the door.

Installation Procedure

    Object Number: 1378613 Size: SH
  1. Install the window regulator module into the door.
  2. Connect the door harness at the door jamb.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the front side door 3 latch screws to the door shut face.

    4. Tighten
    Tighten the bolts to 10 N·m (89 lb in).

  4. Install the front side door 4 module bolts.

    5. Tighten
    Tighten the bolts to 8 N·m (71 lb in).

  5. Connect the 4 electrical connector rosebuds (2 at the mirror and 2 under the speaker).
  6. Connect the mirror electrical connector.
  7. Install the front side door speaker. Refer to Radio Front Side Door Speaker Replacement .
  8. Install the front door window run channel. Refer to Front Side Door Window Channel Replacement .
  9. Install the front door outside handle. Refer to Front Side Door Outside Handle Replacement .