Rear Window Wiper Arm Replacement. Suzuki XL-7 FWD 2008

For 1990-2009 cars only

Makes 🢒 Suzuki 🢒 2008 🢒 XL-7 FWD 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Rear Window Wiper Arm Replacement

Callout

Component Name

Rear Wiper Arm Nut Finish Cap

Rear Wiper Arm Nut

Notice: Refer to Fastener Notice in the Preface section.

Tip:
Hold the blade tip on the first defroster grid line while torquing the wiper arm nut.

Tighten
10 N·m (89 lb in)

Windshield Washer Arm Assembly

Tip

•	Position wiper blade assembly above the blackout strip as shown in the illustration.

•	Position the blade element on the first defroster grid line, above the blackout.

•	Secure the nut.

•	Install the rear wiper arm nut finish cap.

•	Operate the windshield wipers and inspect for proper operation.