Preliminary Procedures

1. Remove the headlamp assembly. Refer to Headlamp Replacement
2. Remove the two bolts holding the front bumper upper fascia support to the fender. Refer to Front Bumper Fascia Upper Support Replacement
3. Remove the rocker panel molding. Refer to Rocker Panel Molding Replacement .

1

Front Fender Bolts (Qty: 5)

Notice: Refer to Fastener Notice in the Preface section.

Tip
Use a grease pencil to mark the alignment of the fender to body before removing any bolts.

Tighten
10 N·m (89 lb in)

2

Front Fender