Rear Seat Recliner Handle Replacement. Suzuki XL-7 FWD 2008

For 1990-2009 cars only

Makes 🢒 Suzuki 🢒 2008 🢒 XL-7 FWD 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Rear Seat Recliner Handle Replacement

Rear Seat Recliner Handle Replacement Rear No. 2

Callout	Component Name
1	Rear Seat No. 2 Back Release Handle Screw (Qty: 2) Notice: Refer to Fastener Notice in the Preface section. Tip Pull on the release handle to access the screws. Tighten 2 N·m (18 lb in)
2	Rear Seat No. 2 Back Release Handle Tip Disconnect the seat back release handle cable from the handle assembly.

Callout

Component Name

Rear Seat No. 2 Back Release Handle Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tip
Pull on the release handle to access the screws.

Tighten
2 N·m (18 lb in)

Rear Seat No. 2 Back Release Handle

Tip
Disconnect the seat back release handle cable from the handle assembly.

Callout	Component Name
1	Rear Seat No. 1 Back Release Handle Screw (Qty: 2) Notice: Refer to Fastener Notice in the Preface section. Tip Pull on the release handle to access the screws. Tighten 2 N·m (18 lb in)
2	Rear Seat No. 1 Back Release Handle Tip Disconnect the seat back release handle cable from the handle assembly.