Rear Seat Shoulder Belt Opening Bezel Replacement. Suzuki XL-7 FWD 2008

For 1990-2009 cars only

Makes 🢒 Suzuki 🢒 2008 🢒 XL-7 FWD 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Rear Seat Shoulder Belt Opening Bezel Replacement

Callout	Component Name
Preliminary Procedure Remove the rear center seat belt bolt. Refer to Seat Belt Replacement - Center Rear .
1	Rear Seat No. 1 Back Shoulder Belt Opening Bezel Screw (Qty: 2) Notice: Refer to Fastener Notice in the Preface section. Tip Lift up the seat belt to access the screws. Tighten 2 N·m (18 lb in)
2	Rear Seat No. 1 Back Release Handle Tip The bezel is integral to the rear center seat belt assembly and must be replaced as an assembly.

Callout

Component Name

Remove the rear center seat belt bolt. Refer to Seat Belt Replacement - Center Rear .

Rear Seat No. 1 Back Shoulder Belt Opening Bezel Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tip
Lift up the seat belt to access the screws.

Tighten
2 N·m (18 lb in)

Rear Seat No. 1 Back Release Handle

Tip
The bezel is integral to the rear center seat belt assembly and must be replaced as an assembly.