Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Remove the front seat. Refer to Front Seat Replacement - Bucket .
2. Adjust the lumbar support knob until the lumbar basket is in the position of least support.
3. Remove the barrel end of the cable from the lumbar actuator.

1

Front Seat Recliner Handle

Tip
Pull firmly forward on the handle to remove.

2

Front Seat Outer Adjuster Finish Cover

Refer to Front Seat Cushion Outer Trim Panel Replacement .

3

Front Seat Belt Buckle

Refer to Front Seat Belt Buckle Replacement .

4

Front Seat Inner Adjuster Finish Panel

Refer to Front Seat Cushion Inner Trim Panel Replacement .

5

Front Seat Lumbar Support Actuator Knob

Tip
Remove the lumbar knob by pulling firmly on the knob.

6

Front Seat Cushion Cover and Pad

Refer to Front Seat Cushion Cover and Pad Replacement .

7

Front Seat Lumbar Support Actuator Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

8

Front Seat Lumbar Support Actuator